| Frequency range | 100 kHz to 2.7/4/6 GHz [1stRF Option] 100 kHz to 2.7/4/6 GHz [2ndRF Option] |
| SSB phase noise | <-140 dBc/Hz (nom.) (100 MHz, 20 kHz offset, CW) <-131 dBc/Hz (typ.) (1 GHz, 20 kHz offset, CW) |
| Level setting range | -110 to +17 dBm [Standard] -144 to +17 dBm [Option] |
| High power output | +23 dBm (CW, 400 MHz to 3 GHz) [Option] |
| Switching speed | <600 µs (frequency/amplitude, List/Sweep mode) |
| Built-in AM/FM/ΦM/Pulse modulation function [Standard] | |
Expansion Options
Adding additional analog modulation input [Option]:
Adding additional analog modulation input options extends to two internal modulation sources (AM/FM/ΦM) and one external modulation source supporting simultaneous two-signal modulation.
Two independent RF outputs using Dual-RF [Option]:
Supports “Wanted + Interference wave for Rx characteristics tests”, “Amp intermodulation characteristics evaluation” and “RF/LO signal source for Mixer evaluations”.
USB power sensor (Sold separately):
Supports connection of two USB power sensors max.
Expansion to narrowband digital modulation signal generator [Option]:
Adding the digital modulation function [Option] supports generation of narrowband digital modulation signals.
- RF modulation bandwidth : 2 MHz
- Waveform generation software: IQproducer (License sold separately) TDMA IQproducer / Fading IQproducer
BER measurement function [Option]:
Input bit rate: 100 bps to 40 Mbps
Communications Interfaces
- Standard 1000BASE-T, GPIB, and USB interfaces
- Built-in SCPI, MG3700A/MS269xA/MS2830A/MG364xA compatibility modes
